TAHG-3015A

TAHG-3015A-NEW2.1

 

專業用於切割0.5~20mm碳鋼板, 0.5~10mm不銹鋼板,鍍鋅板,電解板,硅鋼, 0.5~3mm鋁合金, 0.5~2mm黃銅紫銅等多種薄金屬材料(厚度以及材料與雷射器有關)

Specially used for cutting 0.5~20mm carbon steel, 0.5~10mm stainless steel, galvanized steel, electrolytic zinc-coated steel, silicon steel, 0.5~3mm aluminum, 0.5~2mm brass and red copper and other kinds of thin metal sheets (The thickness and materials depend on different fiber laser source).

TAHG-3015A-NEW

本機種採用全球第一的德國阿爾法齒輪齒條和減速機, 原廠保用6萬小時, 與德國通快同一品牌;
Original Internationally No.1 German Alpha rack, pinion and speed reducer, 6-year-long service life time is guaranteed;

TAHG-3015A-PARTS

高低雙工作檯節省上下料時間, 最快交換只需要7秒鐘;
Upper and lower interchangeable tables save workpiece feeding time, the fastest interchanging time only 7 seconds;

鑄鋁橫梁為全行業首家採用10噸重的鋼模壓鑄成型, 鋼性好, 強度更高, 是傳統和接鐵橫梁重量的1/2;
Cast aluminum crossbeam: the first manufacture to make the crossbeam by low pressure casting by a 10-tons steel mould, better rigidlity can be achieved. The weight of cast aluminum crossbeam is 50% lighter than the conventional welding steel crossbeam;

 

 

TAHG-3015A-sample

cb2   0-1

 

TAHG-3015A-GRAME

分享本篇:Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInEmail this to someone